Let’s talk about the introduction of wireless technology. Specifically, we will talk about Bluetooth audio transmission. For example, there is an old radio in your car, which doesn’t even dream about Bluetooth. What you can do in this situation? Of course, you can buy a modern model. But what if you are not ready for this step or you have a non-standard shape stereo, which is not so easy to replace? And if you do not mind working with your hands, then you are definitely welcome.
The pairing of the car and Bluetooth devices is necessary to collect and process the onboard computer data, adjust and adjust some of its parameters, transfer media content and connect to a cell phone to work with calls. Many people have a question about how to turn on Bluetooth on a Best Car Stereo Receiver Under $200.
Turning on Bluetooth
Not all Pioneer stereo models are equipped with a built-in Bluetooth adapter. Despite this, they can provide the owner with the ability to use wireless technology after connecting via the AUX output of the Bluetooth equipment. The tuning algorithm for the car radio with the Bluetooth module onboard and the detachable AUX attachment differs slightly. The Pioneer manual describes how to connect your Android phone to the car radio. The first step is to connect your phone to it via USB.
To find out how to connect your phone to the stereo via Bluetooth, there is no need to read the manual, as it is done in the same way as the connection of a smartphone using wireless technology with other devices. The connection can be made from the smartphone and from the car stereo. Both devices will be involved, but depending on the connection method, one of them will be used more. The connection technique is different in these 2 options.
In the 1st case, you have to go into your smartphone settings and activate the Bluetooth function. Then do a scan to find nearby devices available for connection. Soon the gadget display will show an icon of the car, its name, or the brand name of the car stereo. Tap on this name and approve the connection of the selected device.
After that, the car stereo display will show a request to allow the connection of a cell phone. When the connection is established, you can play music from your smartphone on the car stereo.
The sight of wires and flash drives sticking out of the car radio, busy ports, and inputs cause some discomfort to motorists. This can be avoided by installing a Bluetooth device inside the car radio. First, remove the radio from the car and take it to the workplace, where you can do the following with it:
- Remove the outer casing of your car radio.
- Use a tester to test the pin jack and the USB adapter port.
- Install the pins.
- Open the box and solder off the connector with a soldering iron.
- You should end up with a small board.
- The wires with the pins identified before, connect to their own places and attach to the front panel, making a mold to melt the tendril.
- Assemble the finished device into the housing and plug it into the machine.
So, I hope now you have no questions about connecting Bluetooth to your stereo system. And if you still have questions – write in the comments and you will surely find answers.
Leave a Reply