Properly adjusted EQ settings will give you a realistic and rich sound when listening to any genre of music. EQ settings for a perfect sound consist of selecting a ready-made preset and then manually adjusting it. It seems like nothing difficult, but it is difficult to select the optimal values for a person without music education and hearing, the process lasts for hours. It is important to take into account the music genre you are tuning to, the playback characteristics of the particular device, human perception, and the surrounding environment. And today we are going to tell you about the best equalizer settings for car audio bass, mid and treble, and how to adjust car amp.
The best equalizer settings for car audio bass mid treble? Setting the equalizer on your boombox is not much different from setting it on your PC or phone. You also need to adjust the bands to plus or minus. On basic “no-frills” boomboxes (for example, on inexpensive but quality models from Pioneer) equalizers are adjusted with buttons on the panel. Often these car equalizers have a small number of bars, which is due to the small size of the screen. However, this is not always the case.
Table of Contents
Optimal Tuning of The Equalizer in The Car for Better Sound
In terms of acoustics, the car interior is a bad place to listen to quality music. And the problem is not only the cost of the equipment used.
-
The cabin is full of obstacles to the acoustic wave in the form of the backs of the seats, the driver.
-
The car is full of obstacles with different coefficients of absorption and reflection of acoustic waves. And the degree of absorption and reflection for different frequencies is different.
-
The listener is displaced from the center of the acoustic space, located in the center of the cabin.
-
The car penetrates extraneous sounds: engine, noise from under the wheels, and mechanical parts of the vehicle, reducing the acoustic comfort.
What Does an Equalizer Do?
The equalizer increases or decreases the amplitude (loudness) of acoustic vibrations in specific frequency ranges. Amplification below 70 Hz saturates the sound, in the range of 175-250 Hz – causes a hum, the level of which depends on the degree of amplification. At 80-250 Hz the human voice sounds, the female voice has a higher frequency – 160-250 Hz, the male voice has a lower frequency – 80-150 Hz. Keep this in mind if you want to emphasize the vocalist’s voice or make speech intelligible in low-quality recordings or on cheap playback devices. To improve the sound of low frequencies (up to 300 Hz) subwoofer is used. And let’s talk about best equalizer settings for bass in car.
Steps for Better EQ Settings for Bass, Treble, And Midrange
#1 Step:
Park your car before listening to music.
#2 Step:
Turn on the music with different frequencies. This will help you better understand equalization, become more professional, and understand what is the best bass mid treble settings for car.
#3 Step:
Adjust the volume control on your car’s stereo so that all sound comes from the front speakers.
#4 Step:
Listen to the music and notice what you don’t like. Now change the bass treble and mid-range and try to find the best sound for you.
Bottom Line
As a result, the sound coming from the speakers in the cabin of the car depends on dozens of factors, including the material of the upholstery of the seats and the interior, partially absorbing and reflecting acoustic waves. As a result, the bass is muffled by low-frequency extraneous noise, the tweeter and woofer receive peak values due to the vibration of the hard materials in the car (plastic, metal). By means of the equalizer, it is necessary to “cut off” these peaks in the tweeter and woofer, to compensate for the lack of the middle – to make the wide frequency range audible. So I hope in this article you figured out how to adjust your equalizer in the car and what is the bass best equalizer settings for car audio.
Leave a Reply